Discover the
benefits we can
offer you today!

Discover the benefits we can  offer you today!



Surface Art is conveniently located in the heart of Silicon Valley

Click here for a Facility Tour


  • Juki GKG-GL Screen Printer
  • CyberOptics SE500 – 3D SPI
  • Juki KE2055RE – Pick & Place
  • Juki KE1080E – Pick & Place
  • Juki KE2080E – Pick & Place
  • Juki RS-1000II-N: Nitrogen Reflow Oven


81 Bonaventura Drive
San Jose, CA 95134

  • 40,000 SF Building
  • 6,500 SF Office Space
  • 18,500 SF Manufacturing Space
  • 15,000 SF Expansion Space


  • Water-Soluble and No-Clean soldering fluxes
  • Sn63/Pb37 Wave Soldering – Maximum PCB width ~ 15.5”
  • SAC 305 and Sn63/Pb37 Selective and Hand Soldering
  • Standard and “on-BGA” rework


  • Juki GKG-GL Screen Printer
  • Juki KE750L – Pick & Place
  • Juki KE760L – Pick & Place


  • Ekra E5 – Screen Printer
  • Juki KE750E – Pick & Place
  • KE2050L – Pick & Place
  • KE2020 – Pick & Place


  • Juki RS-1000II-N: Nitrogen Reflow Ovenuki GKG-GL
    Screen Printer


  •  Sn63/Pb37 TD NU/ERA 16” Dual Wave Soldering Machine
  • Sn63/Pb37 Air-Vac PCBRM-12 Selective Soldering System
  • Sn63/Pb37 – Wenesco M91C Fountain Solder Pot
  • SAC 305 Air-Vac Corp. PCBRM 15 Selective Soldering System
  • Sn63/Pb37 Wire Tinning Solder Pot


  • Leaded Multiple Hakko # 850M-Vx SMD Rework Stations
  • Leaded Multiple Metcal, OKI and JBC Soldering Stations
  • Leadfree Multiple Hakko # 850M-Vx SMD Rework
  • Leadfree Multiple Metcal, OKI and JBC Soldering Stations


  • Electrovert Aquastorm 200 DI Water Cleaning System
  • Aqua Klean Systems AKS-SMI – D/I Scrubbing/
    Filtration System
  • Envirosense Tsunami Class III Batch Aqueous Cleaning System


  • Multiple Electric Torque Screwdrivers
  • Multiple Manual Torque Screwdrivers
  • Miller 4Z643 Bench top Computer Controlled Press
  • Multiple Manual Bench and Floor Presses
  • Schleuniger Model Ecostrip 9300 Wire Stripper
  • Zebra Link Label Printer


  • Counting Scales
  • Blue M Electric # MP606ERI Convection Bake Oven
  • Grieve Model 323 Bake Oven
  • RVSI Systemation # MT-30 SMD Tape & Reel System
  • TMC True Storage Refrigerator


  • YesTech YTV-B3 AOI System w/High Mag Camera
  • GenRad GR-X1500 X-Ray System
  • DigitalTest MTS500 Flying Probe Tester
  • Foresite C3 Critical Cleanliness Control Tester
  • Various Multimeters, Power Supplies, Scopes, and


  • Conceptronic HGR-2000 BGA Rework Station
  • Various Multimeters, Power Supplies, Scopes, and Microscopes
  • KIC X5 Thermal Profiler
  • TennyTen Model TTC mt Temp Cycle Environmental Chamber


  • 3M 740 Wrist Strap Tester
  • Dell Servers – Web / Internet / Printer
  • Dell Servers – PDC / Exchange / BDC / File / Tape Back Up
  • Dell Servers – ERP / Accounting Systems
  • Telephone Exchange System
  • Primary Air System – Kaeser Compressors KRD250, Drier
  • Backup Air Compressor – Kaeser Airbox
  • Nitrogen Generator – N2-GEN 350S
Questions about our equipment?


Zoltan Says

“I have been a satisfied customer of Surface Art for 25 years, including 12 years as engineering manager of C-Cube Semiconductor, LSI Logic and Marvell Semiconductor in California,and 13 years holding similar positions in Sydney, Australia. Surface Art have been my go-to PCB assembler, turn-key manufacturer, and rework service provider when the project required quality, short turn-around time, and reliable customer service. I have been impressed by the value Surface Art have been able to deliver consistently, in the face of competition from China: several RFQ’s we conducted over the last decade confirmed that when pricing, quality, speed, and service were all put together, Surface Art have remained a strong contender, and there was no reason for us to look elsewhere.

I have always appreciated the prompt, effective, clear communication we were able to have with Surface Art, and the large number of projects they completed without any mistakes at all. Over the last 25 years, I cannot recall a single incident of a major mistake or production defect that had an impact on our project execution.

Surface Art have often impressed me with their rework capabilities. They have removed, decapped, repopulated many chips in delicate situations without damaging the parts,and completed many challenging board-level reworks for us.”


• Principal Electronics Engineer / Aerial Imaging Technology Company

Ann Says

“I have worked with Surface Art for over 20 years.During that time we have relied on SAE for high quality, on time delivery and great customer service.We have always received the best of all three.
Although there are too many examples of how they have done an outstanding job, to list here I can say they have never missed a shipment nor had a quality issue that impacted any of our clients.
I would recommend SAE to any and all potential clients who value a high level contract manufacturer. They are best in class.”


• President / SEMS

Cindy Says

“Working with Surface Art over the past 15 years has been a wonderful experience. They help me to keep on track with my project timelines because I can tell them what lead time I want rather than being told they need 3-4 weeks to complete. Every product I have received has met my quality requirements and I have never had to return anything for re-work. Working with them takes the stress off of me knowing that I will get what I asked for when I asked for it. I have yet to find another manufacturer that can meet my expectations for quality assemblies in a short lead time.”


• Sr. Technical Sourcing Specialist / Medical Device Company

Jessica Says

Thanks so much, SAE, for 100% on-time delivery.The most valuable traits that I appreciate the most are trust and communication. There were times we did not provide correct information; SAE still works its best to help us.


• Director of Manufacturing & Supply Chain / IOT company

George Says

“Surface Art has been vital in providing us with quality PCBs and excellent customer service. It’s a no-brainer when it comes to choosing Surface Art for any PCB work for a project, because I know they’ll get it done, provide feedback, and give competitive pricing, all within a few email exchanges. I can rely on Surface Art to provide working goods at any quantity.

Surface Art’s dependability and ease-of-communication are the most valuable traits I appreciate. Having been a customer of Surface Art for over 4-years, we’ve been able to streamline full and partial turn-key assemblies knowing that the quality of work we end up with is reliable and issue-free.”


• Electrical Engineer/ Research & Development for Government Sponsored Programs

Jeffrey Says

“Our company works with SAE for the past 5 years on the PCBA prototyping. We can always count on them for the reliable fabrication so we can focus on de-bugging and modify our circuit design. They are very responsive to our many last minute demands and very supportive to match our needs. As a startup company, having partners that can quickly response to its needs is critical. I am very happy working with SAE and will continue to do so.”


• CEO & Co-founder / Power Transmission Company

Won Says

“Always can count on promised delivery date so our schedule can be met.As a longtime customer, I am probably taking many things SAE does as granted because SAE delivers. It’s always a pleasure to work with SAE. Happy to see same employees year after year too.On time delivery, excellent quality and superior customer service. Great communications.”


• Eng Support / Semiconductor Company

Juan Says

“Surface Art Engineering has always been there for any new production introductions we have done and or picking up where another provider fell short. There is no challenge that we have encountered, that SAE has not solved. During this troubled time of parts and long lead times, SAE has helped provide options across their network!They are great and thorough at NPI, and then can even support your post beta launches.”


• CEO /Founder / IOT Company

Andy Says

“Even if a PCB is destined for production in Asia, having a local CM in the Silicon Valley is imperative.
For about twenty years now – and across three different employers – I have turned to Surface Art to build early development versions of every sort of board, from multi-kilovolt designs to multi-gigabit per second boards. They are responsive, they maintain their quality, and they follow through on their commitments.”


• Principal Electrical Engineer / Medical Device Company

Derik Says

“Surface Art Engineering has been a reliable source for our engineering boards for many years.
Each assigned program manager stays on top of the PCB build every step of the way from quote to delivery.
Angela Choi, our program manager, has often gone beyond her area of responsibility to make sure the design is built correctly and the assembly is delivered on-time. Fast turn, competitive pricing, responsiveness and excellent communication are what Surface Engineering is well known for, and I am glad SAE is part of ATE development team.”


• Sr. Hardware Design Engineer/ Enterprise Computing Company

Experience Surface Art’s level of expertise, passion and total care
every step of the way.

Schedule call